Payments

The Payments Page contains the details of all payments that employees can receive from this company.

To see this page, click on the toolbar and click on the 'Payments' tab.

CAUTION:

When you setup a new company, some standard payments (e.g. Time One hours, and Salary payments) are set up here for the program to use. You should not change or delete these standard payments.

Every allowance or other type of payment that can be paid to an employee must be setup here before it can be paid. This is where the calculation 'rules' for each payment are defined so the program can calculate a pay.

Description Enter the description (name) of the payment as it will appear on timesheets, payslips and reports. You should try to make each name as clear and distinct as possible to make it easy for the person entering timesheets to choose the correct payment.

CAUTION:

You cannot change the description of some of the payments that are set up when you create a new company. Attempting to do so will have no effect.

Data Entry Code Enter a code (or 'short key') that can be typed when entering timesheets to quickly choose this payment. When you create a new payment a default Data Entry Code will be generated, based on the description you enter, but you can change this code. If the company already has standard allowance codes or numbers that are entered onto timesheets, you may wish to continue using those.

Deactivate from Timesheet/Permanent tabs If this is selected, the payment or deduction will not appear when you're entering timesheets.

Calculation Method

The Calculation method controls how the allowance is calculated and paid, so it is very important that it is setup correctly. There are different types of calculation method that you can choose from that perform different calculations, and these are each explained below.

Fixed This pays a fixed amount every time this allowance is paid. (e.g. Meal Money of $7.65). Enter the rate to pay here. If the amount changes each time, or between employees, simply enter zero, then override the value on the Permanent transactions or the Timesheet. Choosing this option also allows you to enter a 'Default Quantity'.

This allows the payment to automatically choose a quantity based on the number of hours the employee worked - see Default Quantity for a description of each Default Quantity option. You can still override this quantity on the timesheet if you need to, regardless of the Default Quantity option.

Hourly This pays a percentage of an employee pay rate. (e.g. Shift Allowance of 30% of Hourly Rate). Enter the percentage and select the employee rate from the list. The employee's pay rate is looked up on the employee's Payment Information page when the pay is calculated.

% Earnings This pays a percentage of an earnings type.(e.g. Holiday Pay as 8% of Gross Holiday Pay Earnings). Enter the percentage and select the earnings type from the list. The actual pay rate is calculated during the pay calculation, based on the appropriate earnings.

Annual Leave / Holiday Pay This is used by the program for Annual Leave, Casual Holiday Pay and Annual Leave Cash Up type payments, and correctly calculates these according to the Holidays Pay Act.

Apply Average Daily Pay This indicator is used to determine whether the payment will apply the employee's Use Average Daily Pay? option. If it is selected the rate for this payment will default to the system calculated Average Daily Pay for all employees who have the Use Average Daily Pay? option ticked on the Employee - Payment Information screen. This option can only be selected for payments with 'Sick Leave', 'Alternative Holiday' or 'Other Leave' selected as the 'Earnings Type'.

Factor Select the factor to multiply the rate by when calculating this payment. The rate is multiplied by this factor when the pay is calculated. This is usually only used for overtime and penal time rates (e.g. Time and a Half, Double Time or Penal Quarter).

Sequence Determines the order in which payments will be listed on the timesheet, payslip, and other reports. This is useful if a specific order is required, such as if you have payments for each day of the week. A payment set as sequence 1 will print first, and 199 will print last. Sequence 200 is reserved for the Holiday Pay Owing transaction.

Costing Code

Enter the Costing Code that this allowance will be charged to.

If this allowance is to be charged to the employees default costing code, rather than a specific costing code, then select that option. If you want to be forced to key in a costing code when entering transactions, select that option.

Accumulates into Special Total

Tick the appropriate box(es) here if the allowance is to be accumulated into one of the five Special Totals.

CAUTION:

Special Total descriptions can be maintained in the Company Information section.

Tax Type

Select how this allowance is taxed:

  • Taxable - Select if the allowance is taxed at the employees standard tax code/percentage. Taxable allowances must have PAYE deducted, along with the employee's wages.

  • Extra Pay - Select if the allowance is taxed at the Extra Pay Rate. Lump sum payments paid as annual or special bonuses, retiring or redundancy payments, restrictive covenant or exit inducement payments, gratuities, back pay or Annual Leave Cash Up are "extra pay" payments. There are three tax rates for lump sums, which are shown in the current PAYE tax tables. Overtime or any regular payments are not lump sum payments.

  • Schedular - Select if the allowance is a Schedular Payment. Schedular payments are payments made to people who are not employees but who are employed on a contract-for-service basis. These activities are taxed at a flat rate. When you select this taxation method, you will need to enter the taxation rate (as a percentage) in the Tax Override field - this can be 0% or greater.

  • Non-Taxable - Select if the allowance is not taxed. Tax-free allowances should be added to your employees' net wages (wages after PAYE) when you pay them. You can decide for yourself (using the Inland Revenue guidelines) whether the allowance you want to pay will be tax-free or not. There are three types of allowances commonly paid: benefit allowances, reimbursing allowances, and travelling allowances.

  • Reimbursing - Select if the allowance is not taxed, and not considered as earnings. Reimbursing allowances are payments made to employees to compensate them for expenses they have had while doing their job - such as meal allowances, mileage allowances or tool money. Reimbursing allowances are not taxable. However, if the payment is more than the employment-related expenses, the excess is taxable.

Earnings Type

Select how this allowance is to be reported:

  • Ordinary Time

  • Overtime

  • Penal Time

  • Allowance

  • Annual Leave

  • Sick Leave

  • Alternative Holiday

  • Time in Lieu

  • Other Leave

  • Annual Leave Cash Up

Accumulates Into

Tick all of the earnings that this allowance is to be counted towards.

ACC Liable Earnings Tick if the allowance is liable for ACC Earner Levy. Earnings that are not liable for the ACC Earner Levy are:

  • earnings in excess of the maximum ACC Earner Levy rate for any employee

  • schedular payments

  • redundancy payments

  • retiring payments

  • student allowances

Super. Earnings Tick if the allowance is included in Superannuation calculations.

Apprentice Hours Tick if the allowance quantity is to be added into an Apprentice's Apprentice Hours.

KiwiSaver Employee Contribution Earnings Tick if the payment should be included in the "KS (KiwiSaver) Employee Earnings" accumulation balance that can be used as the basis for calculation of percentage-based KiwiSaver Employee Contributions. Note that redundancy payments or accommodation allowances are not to be included in the employee earnings.

KiwiSaver Employer Contribution Earnings Tick if the payment should be included in the "KS (KiwiSaver) Employer Earnings" accumulation balance that can be used as the basis for calculation of percentage-based KiwiSaver Employer Contributions. Note that redundancy payments or allowances are not to be included in the employee earnings.

Compliant Employee Contribution Earnings Tick if the payment should be included in the "CF (Compliant Fund) Employee Earnings" accumulation balance that can be used as the basis for the calculation of percentage-based Compliant Fund Employee Contributions. Note that compliant earnings are based on base salary as defined by the fund.

Compliant Employer Contribution Earnings Tick if the payment should be included in the "CF (Compliant Fund) Employer Earnings" accumulation balance that can be used as the basis for the calculation of percentage-based Compliant Fund Employer Contributions. Note that compliant earnings are based on base salary as defined by the fund.

Leave Accumulation

Tick to indicate what Leave Rates this payment will accumulate into.

Average Gross Tick this option if the payment should be included in the calculation of the Average Leave Rate.

Ordinary Gross Tick this option if the payment should be included in the calculation of the Ordinary Leave Rate. Normally, you would leave this option unticked for any one off, incentive based, or irregular payments.

Include In Current rate This option only applies to payments with the "Allowance" Earnings Type selected. Tick this option if you want the value of the allowance to be included in the calculation of the Current Leave Rate used when determining the hourly or daily rate for Annual Leave transactions.

CAUTION:

The allowance must be present on the employee's Permanent screen with a non-zero quantity and rate in order to be included in the Current Leave Rate calculation.

Example: An employee who works a 40 hour week is paid weekly and receives a permanent weekly car allowance of $50.00. His normal hourly rate is $20.50. Because the car allowance payment has the Leave Rate option ticked the result of the Current Leave Rate calculation is increased by $1.25 (i.e. $50.00 / 40 hours = $1.25) to $21.75. Without this option ticked, the Current Leave Rate would be his normal hourly rate of $20.50.

CAUTION:

For Annual Leave Cash Up type payments all of the above Leave Accumulation indicators should NOT be selected.

Unpaid Leave (LWOP) This option is available if the Earnings Type is set to "Ordinary Time", "Annual Leave", "Sick Leave", "Alternative Holiday", "Time in Lieu" and "Other Leave". If selected, the payment cannot be associated with a rate. The unpaid units entered for a payment with an Earnings Type of "Annual Leave", "Sick Leave", "Alternative Holiday" or "Time in Lieu" will reflect the Unit type (Hours or Days) the leave is recorded in for the employee. For "Other Leave", the unit type will be based on what units the Annual Leave is recorded in.

When Annual Leave is calculated in weeks, Unpaid Leave or Leave Without Pay (LWOP) of more than one week affects the employee's Average Weekly Earnings (AWE). In this case, either move the employee's Annual Leave Due Date forward the appropriate number of weeks, or reduce the AWE divisor by one for each week of LWOP taken beyond the first (e.g. two weeks of LWOP means the divisor should be reduced by one week, so gross earnings are divided by 51 weeks instead of the usual 52). When entering Leave Without Pay on the 2-Timesheets step, you will be prompted to enter the number of weeks to reduce the divisor by (or enter nothing and update the Annual Leave Due Date instead).

CAUTION:

Certain types of unpaid leave are exempt from this requirement, e.g. unpaid Sick Leave, unpaid Parental Leave, unpaid Bereavement Leave or unpaid leave taken under ACC. Payments with the Unpaid Leave (LWOP) option ticked that have one of the exempt Earnings Type options will not prompt you to reduce the AWE divisor. See "Leave without pay" on the MBIE website for more information.

In order to record Unpaid Leave units so that they are included in the calculation of Annual Leave entitlements (e.g. Annual Leave related hours x 8% for a Variable Hours employee), the Earnings Type must be "Ordinary Time". This could be applicable when recording ordinary hours for a Variable Hours employee on Parental Leave whose unpaid leave hours are to be accumulated and used in the calculation of their Annual Leave entitlement. See the "Parental Leave" document on the MYOB IMS Payroll Education Centre website.

Accumulate Units For

Holiday Rate Tick this option if the unpaid units are to be accumulated into Leave History (unit divisor) and subsequently used in the calculation of the Holiday Rate, i.e. the Holiday rate will in effect be lower, as only units, not value, will be used in the calculation.

Average Daily Pay (ADP) Rate Tick this option if the unpaid units are to be accumulated into Leave History (unit divisor) and subsequently used in the calculation of the ADP Rate, i.e. the ADP rate will in effect be lower, as only units, not value, will be used in the calculation.