Payment Information
The Employee Payment Information page displays details about how much, how often and how an employee is paid.
To see this page, click
on the toolbar and click on the 'Payment' tab.
Pay Frequency
Click on the frequency (e.g. weekly, fortnightly or monthly, etc.) that matches how often the employee is paid. When you open a Pay Period to calculate a pay you select some pay frequencies to pay. Only employees with one of the pay frequencies you select will be included in that pay period.
Tax Details
IRD Number Enter the employees IRD Number. If you do not know what the employee's IRD number is, you must enter zeros in this field (i.e. 000-000-000) which will automatically change the Tax Code to ND (No Notification). As check-digit rules are applied to the number you enter, the program will only let you enter valid IRD Numbers. If the IRD Number field stays highlighted after you have entered a number it is invalid. In this situation you must either type in a valid number or enter zero's or select the ND Tax Code (see below). To access the IRD# (number) lookup box use the + key on the numeric keypad to jump to the Emp# search field first and then hit the Tab key to forward to the IRD# lookup box. A zero IRD Number may also be assigned to the NSW Tax Code for the first month of employment if the employer is an RSE (Recognised Seasonal Employer).
Tax Code Enter or select the employee's tax code. All possible New Zealand tax codes are listed in the drop down list. If you select the ND (No Notification) Tax Code, the IRD Number field will change to 000-000-000 - see above.
Expires Only required for IR Certificates (STC - Tailored Tax Code, RDE - Loan Repayment Deduction Exemption and SDR - Student Loan Special Deduction Rate). Enter the expiry date shown on the certificate. If you change the tax code to any value other than STC or the value of the "Certificate" field is changed to "None", the "Expires" date will change to blank and the field is disabled. For STC certificates when the expiry date is reached in comparison to the current payroll period "Employee Payment Date", unless a new expiry date is entered or the tax code is changed to another value, the employee will have tax deducted at the "No Notification" rate plus Earner Levy and any Student Loan override rate will default back to the standard deduction rate.
PAYE Override % This is only required if the employee has a special tax rate rather than one of the standard tax codes. Therefore it is usually left blank. If the employee has a special tax rate, enter the tax percentage here (The tax code must be STC or WT). This percentage will be used instead of the normal tax calculation.
For the STC tax code, the rate on the form provided by the IRD includes the ACC Earner Levy.
Extra Pays override % This is only required if the employee requests a special higher tax rate for Extra Pay payments. Leaving this box blank will cause the system to determine which rate to use based on payments made in the last four weeks. The four week period is deemed as payment dates 28 days prior to, but including, the payment date of the Extra Pay. If an Extra Pay Payment is made in conjunction with other payments which are not Extra Pay type payments then the value of those payments will be included in the gross of the last four weeks.
This figure must exclude ACC Earner Levy.
Contractor? Tick this box to indicate that this employee has 'Contractor' status. Selecting this status will result in the following:
-
The 'WT' Tax Code will automatically be assigned with a PAYE Override % rate of zero. These values cannot be changed.
-
For new employees, Annual Leave will be set to "Casual" and the % of Gross will be set to zero.
-
The employee cannot be set up with KiwiSaver and/or Compliant Fund contributions.
-
During the Check Input process, a contractor's timesheets will be validated to ensure that the above criteria has been met and there are no taxable payments (will only accept Non Taxable and Reimburing type payments) and no IRD related deductions such as Child Support, KiwiSaver, IRD Authorised, Pay Giving etc. The PAYE transaction must be present, however.
GST Registered? Tick this box to indicate that the contractor is GST Registered. This indicator may be utilised at a later date to print a custom Buyer Created Invoice.
Student Loans
Student Loan override % This is only required if the employee has a STC - special tax rate for Student Loan Repayments. Therefore it is usually left blank. If the employee has a special Student Loan rate, enter the percentage here. This percentage will be used instead of the normal Student Loan calculation percentage rate.
Income Type This is only required if the employee has a tailored rate (STC) for Student Loan Repayments therefore it is usually left blank. If the employee has a special Student Loan rate select the "Income Type" the special rate is to apply to as declared on the STC Certificate - "Primary" or "Secondary". This is required as since the employee now has an STC tax code there would be no way of determining as from a normal Student Loan Tax Code, i.e. the "ML SL" tax code, whether the employee's earning are Primary or Secondary income. If the employees earnings are Primary, i.e. the "M SL" tax code, then the Student Loan deduction is based on the Total Gross for that pay period minus the Student Loan threshold. If the earnings are Secondary, i.e. the "S SL" tax code, then the deduction is based on the Total Gross for that pay period.
Certificate Select either "RDE" (Repayment Deduction Exemption) or "SDR" (Special Deduction Rate) if you have received the relevant Certificate from IR concerning the employee. "RDE" selected will require the "Tax Code", "Expires" and "Expiry Tax Code" fields to be entered as detailed on the Certificate. "SDR" selected will require the "Expires" and "Student Loan override %" fields to be entered as detailed on the certificate.
Expiry Tax Code This is only required if the employee has a "RDE" Certificate. Once the expiry date of the certificate is reached, this Tax Code will be used as the employee's tax code and will be blanked out.
Payment Method
Select Bank, Cash or Cheque according to how the employee receives their pay. If an employee has a mixture of different payment methods (e.g. they receive some cash, and some direct credit), this payment method is used to pay the remainder of their pay after all other deductions have been made. Examples:
-
If an employee has $100 per pay sent to a savings account, and the remainder in cash, their payment method is Cash, and they have a fixed deduction of $100 (see Working with Deductions).
-
If an employee is paid by cheque, except for $20 per pay in cash, their payment method is Cheque, and they have a fixed deduction of $20 cash (see Working with Deductions).
Bank Account If the employee has their remaining pay direct credited to a bank account, enter their account number here (If the employee has fixed amounts going to other bank accounts, they are entered as deductions). There is a check digit validation on the bank account number, so the program will only let you enter valid numbers. If this field stays highlighted after you have entered a number it is invalid - you must type in a valid account number or pay the employee by another method.
If the money is going to a Credit Union or the PSIS, enter that organisation's holding account here. The actual account details for the employee go into the Bank Ref/Part/Code fields, as advised by that organisation.
Bank Ref If the employee has a bank account, the text that you enter into this reference will appear on their bank statement against their pay. E.g. you could enter "SALARY" or "WAGES" here.
Bank Part If the employee has a bank account, the text that you enter here will appear on their bank statement against their pay. This is usually left blank, but may be required if the account is for a credit union or the PSIS.
Bank Code If the employee has a bank account, the text that you enter here will appear on their bank statement against their pay. This is usually left blank, but may be required if the account is for a credit union or the PSIS.
Employee Type
Wage (per Hour) Select this option if the Employee is paid an Hourly Rate, and enter their hourly rate in the per Hourly box. This sort of employee is called an Hourly Wage Worker.
Salary (per Pay) Select this option if the employee is paid a fixed amount each pay period, and enter the amount they are paid each period in the Salary (per Pay) box, e.g. their annual salary divided by twelve for a monthly paid employee. This sort of employee is called a Salaried Employee.
Salaried Employees can also have hourly rates. This is not usually required, but you may have a contract that pays overtime (at an overtime hourly rate) to some of your salaried employees.
GSCM This option ("Government Salary Calculation Method") is only available for employees with Employee Type - Salary (per Pay). When this check box is ticked, the system uses the annual salary calculation rates prescribed by government to calculate the "per Year" figure.
The GSCM conversion rates for each payment frequency are:
|
Weekly |
per Pay amount x 52.1429 (365 / 7 days rounded to 4d.p.) |
|---|---|
|
Fortnightly |
per Pay amount x 26.0714 (365 / 14 days rounded to 4d.p.) |
|
Four Weekly |
per Pay amount x 13.0357 (365 / 28 days rounded to 4d.p.) |
|
Monthly |
per Pay amount x 12.0000 (as per standard rate method) |
|
Half-Monthly |
per Pay amount x 24.0000 (as per standard rate method) |
The standard rates used to determine an employee's annual salary:
|
Weekly |
per Pay amount x 52 |
|---|---|
|
Fortnightly |
per Pay amount x 26 |
|
Four Weekly |
per Pay amount x 13 |
|
Monthly |
per Pay amount x 12 |
|
Half-Monthly |
per Pay amount x 24 |
By default MYOB IMS Payroll bases its salary calculations in any pay period on the per Pay amount. The alternative methods used to calculate the "per Year" figure are provided for informative purposes only.
Pay Rates
Enter the pay rate(s) that an employee is paid at here. (Up to five different hourly rates are available).
Often, hourly wage workers will only have their basic hourly rate, which must be entered in the Hourly box. However many employment contracts have provision for additional rates, e.g. an employee may be paid a fixed overtime rate (rather than time and a half or double time), or an employee may receive a different rate for a second job.
All employees must use the same Hourly Rate number (2, 3, 4 or 5) for each different type of rate, e.g. fixed overtime is always Rate 2, and a secondary job is always Rate 3.
Use Average Daily Pay?
This options allows you to specify whether the employees system calculated 'Average Daily Pay' will be applied by default, to payments with the Apply Average Daily Pay option selected. The system calculates the Average Daily Pay as follows:
|
Days |
= |
Gross Earnings over the last 52 weeks |
|---|---|---|
|
Number of Whole or Part Days Worked or on Paid Leave during the last 52 weeks |
|
Hours |
= |
Gross Earnings over the last 52 weeks |
|---|---|---|
|
Total number of Hours worked in the last 52 weeks |
Hours Worked (Minimum)
Hours per Day Enter the minimum standard hours an employee works in a day (e.g. usually 7.5 or 8 for a Permanent Employee with Set Hours of work, less for a Permanent Employee with Variable Hours of work). This may be zero for a casual employee, or for a Permanent Employee with Variable Hours of work, if the hours vary each day.
Hours per Period Enter the minimum standard hours an employee works in a pay period. e.g. usually 37.5 or 40 for a Permanent Employment with Set Hours of work employees paid weekly. For Permanent Employment with Variable Hours of work staff enter the average hours you expect the employee to work each pay period over the next 12 months. For casual staff this may be zero if no meaningful value can be entered.
The hours per period is used to determine how many hours to charge to a costing code for a Salaried employee. When Annual Leave in Weeks is enabled, Annual Leave entitlements do not use this value - they are calculated based on the Agreed Definition of a Week entered on the Employee Leave page.
Cash Rounding This is the total of any cents advanced to an employee to round their pays up to the minimum cash (or cheque) rounding used.
You cannot change this field, but if you need to load this information, use the Load Totals facility (available from the Employee Totals Page).
Payslips
No Payslip Tick this box if the employee does not require a payslip to be either printed or emailed.
Printed Tick this box if the employee wishes to receive a printed payslip.
No IMS Online Payslip Tick this box if using the IMS Online facility but the employee is not to receive an online payslip.
Emailed Tick this box if the employee wishes to receive payslips by e-mail. If an email address has not already been set up for the employee a pop-up window will appear allowing entry of the email address at this point.
Password If the Emailed option has been ticked, a password field will be displayed. Enter the password specified by the employee if sending a password encrypted PDF document is a requirement of either the employee or your company. In order to utilise the encrypted PDF option, the Advanced Options check box must also be selected on the payslip options screen being used for sending email payslips.
